• Home
• Knowledge base
• Sensor Broadcast

What is Sensor Broadcast

Sensor Broadcast is the third stage. Once the tree is drawn, everything it senses is carried onward, live, to your central Bhairava Dashboard, so one screen can watch many sites.

What is sent onward

• Every reading. What each sensor reports, as it reports it.
• Every change. A sensor that turns green, or goes red.
• Every alarm. When something needs attention, the dashboard hears about it too.

It happens by itself

Once your sensors are fused into the tree, there is nothing more to do. You do not press anything or send anything. Broadcast simply carries on, alongside the watching.

One screen, many sites

Every site you look after can send to the same central Bhairava Dashboard. Someone responsible for several sites sees them together, in one place, instead of visiting each one.

What if the internet is not available

The central view needs an internet connection. The site tree does not: it keeps working on the site, locally, without one.

You can switch it off

If you would rather keep a site to itself, Broadcast can be switched off. The tree on the site carries on working locally either way.

Nothing is ever sent back

Broadcast only goes one way. Nothing from the dashboard is ever sent back to change your controllers or sensors, just as Bhairava Sense itself only asks and reads.